Let’s find your next opportunity​

{{ job.job_posting_title }}
{{item.trim() }} {{item.trim() }} {{item.trim() }}
{{ job.job_posting_title }}

{{ job.is_cms_job ? (job.cities.split(';').length > 1 ? 'Various locations' : job.location_mappings[0]) : (job.location_mappings.length > 1 ? 'Various locations' : job.location_mappings[0]) }}

saved
viewed

Mississauga, Ontario, Canada

Candu Energy Inc. is looking for a Fuel Engineering Analyst to be a part of our team in the Fuel and Physics department supporting the design of new nuclear power plants and the operation and refurbishment of existing CANDU nuclear power plants.

Your role:

  • Lead, plan, perform, document, review, and/or verify technical analyses related to fuel design, fuel thermal hydraulics, fuel operation and safety, ROP, and fuel cycles.

  • Interface with other related skills including deterministic safety analysis and physics.

  • Assist in the development of analysis basis plans, Design verification plan; design requirements, technical specifications, etc.

  • Develop design and analysis codes. Produce high-quality reports effectively summarizing technical information.

  • Present results to internal and/or external stakeholders. Collate, assimilate, and summarize results from existing analyses.

  • Follow the relevant procedures, guidelines and standards governing the work being performed. Attend and participate in meetings at the office, remotely, or at client sites as needed.

  • Continually improve skills through instructor-led courses and/or on-the-job training.

About you:

  • A Relevant honours degree from a university of recognized standing in Engineering or Science

  • A minimum of 5 years of relevant experience (experience obtained in advanced degree programs will be considered for applicability against this requirement);

  • Must be conversant with computer environments; proficiency in both Linux and WINDOWS environments is a strong asset; experience in licensing activities would also be an asset;

  • Proficient in finite element analysis and use of LS-DYNA for performing stress analyses;

  • Developing models and performing seismic analysis;

  • Broad knowledge of thermal-fluid sciences (mechanical, fluid flow, heat transfers, multi-phase flow and thermodynamics), familiarity and experience with some of the fuel design and safety computer codes such as ELESTRES, TUBRUPT, NUCIRC, CATHENA and ANSYS, proficiency in computer programming, especially FORTRAN;

  • Good knowledge of the CANDU design, with particular emphasis on the fuel design and operation, heat transport system and plant control, containment and moderator systems would be an asset and underlying engineering principles and practices, excellent oral and written communication skills are required;

  • Ability to work well under pressure and be flexible, i.e., must be able to perform varied work assignments effectively and respond quickly to changing project needs, to show initiative while working in a team environment, to work to budget and schedule;

  • Must be willing to travel occasionally to participate in meetings and workshops, full commitment to working in a formal QA environment

Reward & benefits

Explore the rewards and benefits that help you thrive – at every stage of your life and your career at AtkinsRéalis in Canada. Enjoy competitive compensation, employee recognition, and a brilliant range of flexible benefits you can tailor to your health, wellbeing, financial and lifestyle needs.

Make the most diverse opportunities for training and professional development to grow your skills and expertise. And take advantage of our hybrid working culture and generous time-off policies to balance a fulfilling career with your personal life. Be rewarded. Find out more.

About AtkinsRéalis

We're AtkinsRéalis, a world-class engineering services and nuclear organization. We connect people, data and technology to transform the world's'infrastructure and energy systems. Together, with our industry partners and clients, and our global team of consultants, designers, engineers and project managers, we can change the world. We're committed to leading our clients across our various end markets to engineer a better future for our planet and its people.

Find out more.

Additional information

AtkinsRéalis cares about your privacy. AtkinsRéalis and other subsidiary or affiliated companies of AtkinsRéalis (referred to throughout as "AtkinsRéalis") are committed to protecting your privacy. Please consult our Privacy Notice on our Careers site to know more about how we collect, use, and transfer your Personal Data.

By submitting your personal information to AtkinsRéalis, you confirm that you have read and accept our Privacy Notice.

Appropriate accommodation will be provided upon request throughout the recruitment and hiring process as required by Company policy and the Accessibility for Ontarians with Disabilities Act (AODA).

Successful applicants will be notified about AtkinsRéalis' accommodation policies at the time the employment offer is extended, and the information will be shared with new personnel during the onboarding process.

Engineering

Location

Mississauga, Ontario, Canada

Job Type

Full time

Ref

R-164254

Salary range

-

Why choose AtkinsRéalis?

Why choose AtkinsRéalis?

Wherever you are in your career – and whoever you are – AtkinsRéalis is for you. Here, support and collaboration are a vibrant part of a culture that lets you choose where – and how far – your career can go. Take on projects that push boundaries and drive sustainable impact, surrounded by colleagues who believe there's no limit to how brilliant you can be. It's time to join a like-minded team where you'll be rewarded, supported, and free to be your kind of brilliant.

video thumbnail

Make it brilliant, a career with AtkinsRéalis

Our supportive, collaborative culture inspires us as a global community every day.

Watch this short film and imagine what you could achieve here, too.

Related jobs

Substation Designer
Clean power Engineering Full time
Substation Designer

Toronto, Ontario, Canada

Trackwork / Railway Engineer
Transportation Engineering Full time
Trackwork / Railway Engineer

Various locations

Senior Engineer, Bus Transit Engineering
Transportation Engineering Full time
Senior Engineer, Bus Transit Engineering

Various locations

Trackwork Engineer
Transportation Engineering Full time
Trackwork Engineer

Toronto, Ontario, Canada

Chef(e) d'équipe - Planification des transports
Transportation Engineering Full time
Chef(e) d'équipe - Planification des transports

Montréal, Quebec, Canada

Tooling Design Analyst
Nuclear Engineering Full time
Tooling Design Analyst

Mississauga, Ontario, Canada

Analyste FDMS (RAMS)
Transportation Engineering Full time
Analyste FDMS (RAMS)

Montréal, Quebec, Canada

Systems Integration Engineer
Transportation Engineering Full time
Systems Integration Engineer

Calgary, Alberta, Canada

Senior Reactor Components Engineer
Nuclear Engineering Full time
Senior Reactor Components Engineer

Various locations

Senior Mechanical Stress Analyst/Engineer
Nuclear Engineering Full time
Senior Mechanical Stress Analyst/Engineer

Various locations

Gestionnaire / Chef(fe) d'équipe FDMS
Cities & development Engineering Full time
Gestionnaire / Chef(fe) d'équipe FDMS

Montréal, Quebec, Canada

Ingénieur(e) électrique résident(e) - Centrale Isle-Maligne
Clean power Engineering Full time
Ingénieur(e) électrique résident(e) - Centrale Isle-Maligne

Various locations

Related blogs

Metallurgy and corrosion: Jean‑François

Jean‑François is director of the metallurgy and corrosion group at AtkinsRéalis. With several decades of experience in materials science, welding inspection, corrosion, and quality control, he helps ensure the safety, durability, and reliability of critical infrastructure across Canada.

Card link for Metallurgy and corrosion: Jean‑François
Ragavendran in Blue shirt

Building more than projects: Ragavendran’s journey of growth

Some projects test your technical skills. Others change how you see your career. For Ragavendran, both happened along the way.

Card link for Building more than projects: Ragavendran’s journey of growth

Alexandre, mechanical engineer at AtkinsRéalis: leading industrial lifting projects in Saguenay

When I chose to join AtkinsRéalis in Canada, I wanted to explore a new side of engineering. After working for contractors and equipment manufacturers as an estimator, project manager, and design engineer, this was my first experience with an engineering consulting firm. Today, I can confidently say that this decision has allowed me to broaden my skills while contributing to major industrial projects across the Saguenay-Lac-Saint-Jean region of Quebec.

Card link for Alexandre, mechanical engineer at AtkinsRéalis: leading industrial lifting projects in Saguenay
Praveen smiling in front of camera

Beyond the design: Praveen’s journey from delivery to ownership at AtkinsRéalis

Praveen has grown by taking on new challenges, broadening his perspective, and turning experience into greater ownership.

Card link for Beyond the design: Praveen’s journey from delivery to ownership at AtkinsRéalis
Lekhana in floral dress

Designing with purpose, leading with confidence: Lekhana’s journey at AtkinsRéalis

From solving complex engineering challenges to leading teams, Lekhana’s journey shows how the right opportunities can transform not just what you do, but who you become.

Card link for Designing with purpose, leading with confidence: Lekhana’s journey at AtkinsRéalis
Devendra on his bike

Creating impact through engineering excellence

What keeps an engineer inspired after nearly a decade in the industry? Devendra shares his journey.

Card link for Creating impact through engineering excellence

From engineer to project leader: Serafina on aviation, mentorship, and growth in Florida

Meet Serafina from our Tampa office, where she's helping airports grow and communities thrive.

Card link for From engineer to project leader: Serafina on aviation, mentorship, and growth in Florida
Selfie of Mike and his partner standing in a golf course

Mike on mega projects, reinvention, and aviation at Denver International

From mega projects to airport expansion, read how AtkinsRéalis helped Mike grow beyond project delivery.

Card link for Mike on mega projects, reinvention, and aviation at Denver International

Growing through challenges: Vincent’s journey at AtkinsRéalis

Today, I hold a hybrid role at AtkinsRéalis that combines business development, project management, and technical project delivery. My career path reflects the opportunities I chose to embrace, driven by a constant desire to learn and take on new professional challenges.

Card link for Growing through challenges: Vincent’s journey at AtkinsRéalis

From intern to project manager: Felix on nine years of building an aviation career

Meet Felix, a Project Manager helping shape the future of aviation through digital innovation and major airport projects across Texas.

Card link for From intern to project manager: Felix on nine years of building an aviation career

Building strong teams and stronger communities: Dhara’s career at AtkinsRéalis

Today, I’m the Manager, Municipal Infrastructure, Ontario at AtkinsRéalis, where I lead a multidisciplinary team of more than 40 professionals while overseeing the delivery of complex municipal infrastructure projects. It’s a role that allows me to combine my passion for project delivery with my commitment to supporting and developing people.

Card link for Building strong teams and stronger communities: Dhara’s career at AtkinsRéalis
Award image

AtkinsRéalis named among the 50 GREAT British Employers of Veterans

Proven commitment to those who’ve served, see how AtkinsRéalis supports Armed Forces talent beyond words.

Card link for AtkinsRéalis named among the 50 GREAT British Employers of Veterans